Vision Viewer Configuration guide

The viewer is configured by specifying a series of Commands and Options on the command line. A Command is specified
using a single identifier (command name) while an Option consists of an identifier (option name) followed by an
equals ("=") and a value. Commands are preferred over Options as they are simpler to specify and often provide more complex
behaviour.

Example Command: Debug
	Specifying "Debug" on the command line, causes a series of options to be set

Example Option: LogLevel=0
	Specifying "LogLevel=0" on the command line, causes the option called "LogLevel" to be set to a value of 0

	Depending on the environment, options may need to be surrounded using double or single quotes. Especially so if the option value
	contains spaces.

Option values accept one of the following:
	boolean : A text string, either the value "true" or "false" - The quotes shown here must be left out when specifying the value.
	integer : A number with no fractional digits or .
	number : A number with (float) or without (integer) fractional digits. The decimal separator is a . (decimal point)
	string : A line of text enclosed in double quotes

------------------------------------------------------------------------------------------------------------------------
Resolution Commands:
	HD : [Default] 1280x720
	SD : 720x576 (PAL)
	FullHD : 1920x1080
	Windowed : 1280x720 in a window
	HD0 : Top left quarter 640x480
	HD1 : Top right quarter 640x480
	HD2 : Bottom left quarter 640x480
	HD3 : Bottom right quarter 640x480
	HD4 : 4 quarter windows
	SlideWindowFullHD : 1920x1080 - Slide Window defaults to HD (1280x720)
	CustomResolution Width=number Height=number : Set custom resolution by Width X Height

Speed Commands:
	Vsync : [Default] Soft Vsync and capped to 60
	Max60 : Capped to 60
	Max50 : Capped to 50
	Max30 : Capped to 30
	Max25 : Capped to 25
	Max20 : Capped to 20
	Max : No cap or vsync, runs at maximum frame rate. For testing purposes only
	FullVsync : Hardware Vsync to monitor refresh rate
	HalfVsync : Hardware Vsync to half of monitor refresh rate and capped to 30 (May not work on all hardware. Works on nVidia/Intel)
	SlideWindowVsync, SlideWindowMax60, SlideWindowMax50, SlideWindowMax30, SlideWindowMax25, SlideWindowMax20, SlideWindowMax, SlideWindowFullVsync, SlideWindowHalfVsync : Same as above but overrides setting for SlideWindow

Window Commands:
	SlideWindow : Shows the Main Window and the Slide Window
	SlideWindowOnly : Shows the SlideWindow only
    MainWindowX=0/[Default] : Used to specify the window horizontal position either.

Game Commands:
	Racing, VideoRacing, RacingRoulette, Tennis, Archery, VsFootball, VsFootballLeague, SpinAndWin, Keno, IceHockeyLeague, PreRecFootball, PreRecFootballLeague, LuckyLoot624, LuckyRacing, BasketballLeague, IceHockeyShootout,
	VideoRacingRoulette, VideoFootball, VideoFootballLeague, KenoFootball, KenoFootballLeague, PreRecRealDogs, GoalFootball, GoalFootballLeague, PreRecBasketball, VirtualBasketballLeague, IceHockey, VirtualBasketball, GoalFootballTournament,
	SkillRacing, CricketSuperOver, CricketFinalOver, PreRecRealHorses

Demo Commands:
	DemoDashingDerby, DemoPlatinumHounds, DemoHarnessRacing, DemoCycleRacing, DemoMotorRacing, DemoSteepleChase, DemoHorseRacingRoulette, DemoHorsesEqual, DemoSpeedSkating
	DemoPreRecHorses, DemoPreRecDogs, DemoPreRecSingleSeaterMotorRacing, DemoPreRecFootballEnglish, DemoPreRecFootballItalian, DemoPreRecFootballEnglishLeague, DemoPreRecFootballItalianLeague
	DemoTableTennis, DemoBadminton, DemoArchery, DemoFootball, DemoSingleSeaterMotorRacing, DemoFootballLeague, DemoSpinAndWin, DemoKeno, DemoIceHockeyLeague, DemoLuckyLoot624, DemoLottoHorses, DemoLottoCars
	DemoSkillDashingDerby, DemoCricketSuperOverNational, DemoCricketFinalOverNational, DemoPreRecRealHorses

Diagnostic Commands:
	UniqueLog : Uses a new log file name every time the viewer starts up. The name includes the date and time
	ServerTrace : Turns on detailed server connection logging (Remember to set LogLevel=2)
	UnityTrace : Turns on detailed logging of interaction with 3d viewer (Remember to set LogLevel=2)
	ServerStats : Turns on an overlay showing the server connection statistics
	SimulateNoResult : Simulates not receiving a result on an event. Works in demo and server mode
	SimulateEventRemoval : Simulates deleting the first event from the event card 5s after startup
	SimulateEventRemovalAll : Simulates deleting all events from the event card after SimulateEventDelay seconds
	SimulateEventDelay : Number of seconds from startup to wait before simulating the Event Removal. The default is 5
	SimulateEventDuration : Number of seconds the removing all events will be applied for. The default is 5
	SimulateEventRepeatAfter : Number of seconds after the event removal started to repeat the simulation. The default is 10
	DemoSimulateEndOfDay : Shows a single event. Used to test what happens after the last event of the day
	DebugLog : Turns on debug logging
	Debug : Turns on debug logging, ServerTrace and UnityTrace
	NoTopMost : Turns off Top Most window mode
	NoHost : Turns on a mode where external viewers do not become hosted by Vision (Equivalent to LayeredMode=0)
	NoViewerStartup : Turns off waiting for external viewers to start up (Equivalent to WaitForViewerStartup=false)
	ShowMouse : Turns on the mouse pointer (Equivalent to MouseHidden=false)
	NoShow : Turns off the game animation for all event types (Equivalent to setting [EventType]_ShowEvent=false)
	CustomDemoPreviousResults : Uses DemoPreviousResults.cfg file to override previous results specified in the GenericResources.cfg (DemoPreviousResults.cfg is situated in the root VisionViewer directory)
	DemoJackpotUpdate=true/false[Default] : Enable internal updates to the JackpotV2 data for testing without a server. Only works when Demo is on

Diagnostic Options:
	ServerTraceFlags=list : A comma delimited list of the following: Coms,Events,EventIDs,Results,RealtimeData,Timing
	StressTestServerInstances=integer : Sets the number of server connections to create. Default is 0 which means only one
	LogLevel=integer : Sets logging to one of: 0=no logging; 1=info logging; 2=debug logging. Prefer using Debug or DebugLog commands
	DashingDerby_ShowEvent=true[Default]/false : Used to skip the game animation and go directly to the result
	PlatinumHounds_ShowEvent=true[Default]/false : Used to skip the game animation and go directly to the result
	[EventType]_ShowEvent=true[Default]/false : Used to skip the game animation and go directly to the result
	DemoFirstEventSeconds=integer : Sets the number of seconds until the first demo event runs. The default is 60
	DemoNextEventSeconds=integer : Sets the number of seconds between demo events. The default is 180
	DemoEventDuration=integer : Sets the artificial duration given to a demo event. The default is 160
	LogSharedDataNodes=true/false[Default] : Logs SharedDataNode allocations
	DemoFile1=string : Filename for an additional demo file. Demo events are interleaved
	DemoFile2=string : Filename for an additional demo file. Demo events are interleaved
	DemoFile3=string : Filename for an additional demo file. Demo events are interleaved
	DemoFile4=string : Filename for an additional demo file. Demo events are interleaved
	
General Options:
	SlideWindowX : Overrides the X position for the Slide Window. This can be set to 0 for testing SlideWindowOnly. The default X position depends on the the Main Window's size
	Server=string : Sets the IP address of the server to connect to. Example "127.0.0.1" will connect to the local computer
	Channels=string : Sets the channels to retrieve from the GS. This is a string like "A" or "ABC"
	ConnectingText=string : Overrides the "CONNECTING" text string specified in the language file
	NoMoreEventsTitle=string : Overrides the "NO MORE EVENTS" text string specified in the language file
	NoMoreEventsDetail=string : Overrides the "EVENTS HAPPEN..." text string specified in the language file
	ShowLogo=true[Default]/false : Displays or hides the header company logo
	ShowEventTime=true[Default]/false : Displays or hides the header event time
	ShowEventNumber=true[Default]/false : Displays or hides the header event number
	ShowEventName=true[Default]/false : Displays or hides the header event name
	ShowPreviousResults=true[Default]/false : Displays or hides the previous results display
	CloseBettingOffset=integer : The number of seconds before the event time that the countdown counts to
	ResultsDuration=number : Sets the number of seconds to stay on the result. The default is 10.0
	DecimalSeparator=string : Sets the separator used for displaying decimal fractions. The default is "."
	ThousandsSeparator=string : Sets the separator used for splitting numbers at 1000s. The default is ","
	AmFormat=string : Sets the text appended to a 12 hour time. The default is " AM"
	PmFormat=string : Sets the text appended to a 12 hour time. The default is " PM"
	CurrencySymbol=string : Sets the text used for displaying a currency symbol. The default is "" which shows no symbol
	SafeMarginH : Sets the horizontal size of the screen safe margin based on 1280x720. The default is 70
	              Changing SafeMarginH may have undesirable effects as slides are designed to work right at 70. Use with caution.
	SafeMarginV : Sets the vertical size of the screen safe margin based on 1280x720. The default is 60
	              Changing SafeMarginV may have undesirable effects as slides are designed to work right at 60. Use with caution.
	ShowSlideWindowEventTime=true[Default]/false : Displays or hides the event times on the Slide Window
	AudioDevice=integer : Sets the audio device to use. First device is 0. Default is -1 which uses the default audio device.
	DateTimeOffset=integer : Sets the time offset in milliseconds. A negative value is the same as moving the system clock backwards. Default is 0.
	EnableAdverts : Used to enable advert feature
	PreviousResultsTickerDuration=number : Overrides the default number of seconds to display Previous Results Ticker. The default is 4.0
	ScrollingTicker=true[Default]/false : Switches between "scrolling" ticker (new) and paging type ticker (old)

Preview Options:
	PreviewMode=true[Default]/false : Enables or disables previews for upcoming events
	PreviewDuration=number : Sets the default duration (seconds) used for each event preview. The default is 20.0
	PreviewEvents=integer : Sets the number of upcoming events to preview on the countdown slide (between 1 and 5). The default is 4
	ResultPreviewEvents=integer : Sets the number of upcoming events to preview on result slides. The default is 1

QuadScreen Options:
	QuadScreen : Turns on Quad Screen mode. Screen 1 is top left. Screen 2 is top right. Screen 3 is bottom left. Screen 4 is bottom right
	ScreenXEventTypes=string : Comma separated list of event types that can be shown on screen X. Replace X with a value between 1 and 4
	ScreenXAudio=true/false[Default] : Enables sound for screen X. Replace X with a value between 1 and 4

Jackpot Options:
	EnableJackpots=true/false[Default] : Enables the jackpots display
	ShowInGameJackpots=true/false[Default] : Enables the jackpots display during the game animation
	ShowResultsJackpots=true/false[Default] : Enables the jackpots display on the results screen
	JackpotWinnerDuration=number : Sets the number of seconds that the current winner gets displayed at the beginning of event details. The default is 10.0
	JackpotNameFontFileName=string : Internal setting to override the default font used for the jackpot name
	JackpotTextFontFileName=string : Internal setting to override the default font used for the jackpot text
	JackpotAmountFontFileName=string : Internal setting to override the default font used for the jackpot amount
	JackpotV2 : Command turns on the V2 jackpot feature. This is required in addition to EnableJackpots=true
	ViewerID=string : Specifies an optional string to be prepended to jackpot Source names
	JackpotCurrencySymbols=string : Sets the characters used for displaying a currency symbol. The default is "$"

Racing Options:
    KenoRacingMarkets : Will dissable non Keno markets. All enabled markets are still configurable with normal parameters
	DefaultPageDuration=number : Universal default page duration for Racing pages
	MarketPageDuration=[Default]DefaultPageDuration (Can override DefaultPageDuration with a number here) : Overrides the default number of seconds to display each market page. The default is 10.0
	EndPagesDuration=[Default]/DefaultPageDuration (Can override DefaultPageDuration with a number here) : Applying a number to EndPagesDuration will override the timing of the end pages (FirstTwo and FirstThree).
	HasRaceMarket=true[Default]/false : Used to enable the "old" slide where the combination odds displayed is related to the horse in the parade
	RacingShowEventType=true/false[Default] : Displays or hides the header event type
	RacingShowEventTypeAsEventName=false[Default]/true : Displays the event type in place of the event name
	RacingResultsDuration=number : Overrides the number of seconds to show the racing results slide
	RacingPreviewDuration=number : Overrides the preview's duration (seconds) while showing a racing event
	RacingPreviewEvents=integer : Overrides the number of preview events shown while showing racing event details (0 disables previews)
	RacingResultPreviewEvents=integer : Overrides the number of preview events shown while showing a racing result (0 disables previews)
	RacingHorseSilkByDraw=true/false[Default] : Specifies whether horse silks are ordered by ID (the default) or by Draw
	RacingNoPlace : If specified, Place bets will be removed
	RacingNoSecond : If specified, Second bets will be removed
	RacingNoThird : If specified, Third bets will be removed
	RacingNoLast : If specified, Last bets will be removed
	RacingNoLastThree : If specified, LastThree bets will be removed
		RemoveResultsRow : Should be used if there 3 ore more markets removed between Exacta, Trifecta, Quinella, Trio, HiLo, or OddEven. !!NOTE: that the use of this parameter while there are still markets in that row will result in a visual bug
	RacingNoExacta : If specified, Exacta bets are removed
	RacingNoTrifecta : If specified, Trifecta bets are removed
	RacingNoQuinella : If specified, Quinella bets are removed
	RacingNoTrio : If specified, Trio bets are removed
	RacingNoSwinger: If specified, Swinger bets are removed
	RacingNoHiLo: If specified, High/Low bets are removed
	RacingNoOddEven: If specified, Odds/Evens bets are removed
	RacingNoHTH: If specified, HTH bets are removed
	RacingNoSumOfFirstTwo: If specified, SumOfFirstTwo bets are removed
	RacingNoSumOfFirstThree: If specified, SumOfFirstThree bets are removed
	RacingHasQuartet: If specified, Quartet bets are added
	FourRaceFinishers : Shows top 4 finishers in racing replays, in racing results and racing tickers.  3 finishers are the default if not specified. This option will only work on viewers below version 1.9
	RaceParadeFrames=integer : Overrides the number of frames to hold on each participant. The default is 240 (4 seconds)
	Enable_DashingDerby=true[Default]/false : Used to disable DashingDerby
	Enable_PlatinumHounds=true[Default]/false : Used to disable PlatinumHounds
	Enable_HarnessRacing=true[Default]/false : Used to disable HarnessRacing
	Enable_CycleRacing=true[Default]/false : Used to disable CycleRacing
	Enable_MotorRacing=true[Default]/false : Used to disable MotorRacing
	Enable_SteepleChase=true[Default]/false : Used to disable SteepleChase
	Enable_HorsesEqual=true[Default]/false : Used to disable HorsesEqual
	Enable_SpeedSkating=true[Default]/false : Used to disable SpeedSkating
	ShowSixPositions=false[Default]/true : Used to display 6 racing positions only (In-Game) - bigger font and silk images (Horses only - retail and online)
	RacingRaceFinishers=number : Overrides the default number of finishers to "highlight" on the in-game slide and display on the replay slide. The default is 3. The supported range is 3-4. This option replaces the old option 		"FourRaceFinishers" starting from vision version 1.9
	DDBackgroundColor=Color(R,G,B) : Overrides the color of the DashingDerby background
	DDHeadingColor=Color(R,G,B) : Overrides the color of the DashingDerby headings (Slides and Slide Viewer)
	PHBackgroundColor=Color(R,G,B) : Overrides the color of the PlatinumHounds background
	PHHeadingColor=Color(R,G,B) : Overrides the color of the PlatinumHounds headings (Slides and Slide Viewer)
	LookupXXX : Turns on lookup filename for race type XXX. Names are mapped from runner ID and track ID

VideoRacing Options:
    KenoRacingMarkets : Will dissable non Keno markets. All enabled markets are still configurable with normal parameters
	MarketPageDuration=number : Overrides the default number of seconds to display each market page. The default is 10.0
	HasRaceMarket=true[Default]/false : Used to enable the "old" slide where the combination odds displayed is related to the horse in the parade
	RacingShowEventType=true/false[Default] : Displays or hides the header event type
	RacingShowEventTypeAsEventName=false[Default]/true : Displays the event type in place of the event name
	RacingResultsDuration=number : Overrides the number of seconds to show the racing results slide
	RacingPreviewDuration=number : Overrides the preview's duration (seconds) while showing a racing event
	RacingPreviewEvents=integer : Overrides the number of preview events shown while showing racing event details (0 disables previews)
	RacingResultPreviewEvents=integer : Overrides the number of preview events shown while showing a racing result (0 disables previews)
	RacingNoPlace : If specified, Place bets will be removed
	RacingNoSecond : If specified, Second bets will be removed
	RacingNoThird : If specified, Third bets will be removed
	RacingNoExacta : If specified, Exacta bets are removed
	RacingNoTrifecta : If specified, Trifecta bets are removed
	RacingNoQuinella : If specified, Quinella bets are removed
	RacingNoTrio : If specified, Trio bets are removed
	RacingNoSwinger: If specified, Swinger bets are removed
	RacingNoHiLo: If specified, High/Low bets are removed
	RacingNoOddEven: If specified, Odds/Evens bets are removed
	RacingNoSumOfFirstTwo: If specified, SumOfFirstTwo bets are removed
	RacingNoSumOfFirstThree: If specified, SumOfFirstThree bets are removed
	RacingHasQuartet: If specified, Quartet bets are added
	FourRaceFinishers : Shows top 4 finishers in racing replays, in racing results and racing tickers.  3 finishers are the default if not specified. This option will only work on viewers below version 1.9
	RaceParadeFrames=integer : Overrides the number of frames to hold on each participant. The default is 240 (4 seconds)
	Enable_PreRecHorses=true[Default]/false : Used to disable prerecorded horses
	Enable_PreRecDogs=true[Default]/false : Used to disable prerecorded dogs
	Enable_PreRecSingleSeaterMotorRacing=true[Default]/false : Used to disable prerecorded MotorRacing
	Enable_PreRecRealDogs=true[Default]/false : Used to disable pre-recorded real dogs
	Enable_PreRecRealHorses=true[Default]/false : Used to disable pre-recorded real horses
	Enable_PreRecSlotCarRacing=true[Default]/false : Used to disable pre-recorded slot cars
	ShowSixPositions=false[Default]/true : Used to display 6 racing positions only (In-Game) - bigger font and silk images
	RacingRaceFinishers=number : Overrides the default number of finishers to "highlight" on the in-game slide and display on the replay slide. The default is 3. The supported range is 3-4. This option replaces the old option 				"FourRaceFinishers" starting from vision version 1.9
	LookupXXX : Turns on lookup filename for race type XXX. Names are mapped from runner ID and track ID

RacingRoulette Options:
	RacingRouletteShowEventType=true/false[Default] : Displays or hides the header event type
	RacingRouletteShowEventTypeAsEventName=false[Default]/true : Displays the event type in place of the event name
	RacingRouletteResultsDuration=number : Overrides the number of seconds to show the racing results slide
	RacingRoulettePreviewDuration=number : Overrides the preview's duration (seconds) while showing a racing event
	RacingRoulettePreviewEvents=integer : Overrides the number of preview events shown while showing racing event details (0 disables previews)
	RacingRouletteResultPreviewEvents=integer : Overrides the number of preview events shown while showing a racing result (0 disables previews)
	RacingRouletteHistoryTime=true/false[Default] : Specifies whether the history panel shows the game number or game time
	Enable_HorseRacingRoulette=true[Default]/false : Used to disable HorseRacingRoulette
	RacingRouletteType=1[Default]/2 : Used to change colours assigned to numbers. {Default set: 0:G;1:R;2:B;3:R;4:R;5:B;6:B;7:B;8:R;9:R;10:B;11:B;12:R} {Second set: 0:G;1:R;2:B;3:R;4:B;5:R;6:B;7:R;8:B;9:R;10:B;11:B;12:R}
					  For PreRecHorseRacingRoulette the default option is the set number 2 - SolSystems colours.
	RacingColorsLogo : If specified, "Racing Colors" logo is displayed instead of the default "Racing Roulette" logo

Football Options:
	FootballResultsDuration=number : Overrides the number of seconds to show the football results slide
	FootballPreviewDuration=number : Overrides the preview's duration (seconds) while showing a football event
	FootballPreviewEvents=integer : Overrides the number of preview events shown while showing football event details (0 disables previews)
	FootballResultPreviewEvents=integer : Overrides the number of preview events shown while showing a football result (0 disables previews)
	FootballShowDebug=true/false[Default] : Shows a debug string with the current football slide state in the top left of the window
	FootballHideNoGoal : Specify this command to hide the 0 goals odds for all bet types
	Enable_VsFootball=true[Default]/false : Used to disable Football

Football League Options:
	FootballResultsDuration=number : Overrides the number of seconds to show the football results slide
	FootballPreviewDuration=number : Overrides the preview's duration (seconds) while showing a football event
	FootballPreviewEvents=integer : Overrides the number of preview events shown while showing football event details (0 disables previews)
	FootballResultPreviewEvents=integer : Overrides the number of preview events shown while showing a football result (0 disables previews)
	FootballShowDebug=true/false[Default] : Shows a debug string with the current football slide state in the top left of the window
	Enable_VsFootballLeague=true[Default]/false : Used to disable Football League

Tennis Options:
	TennisShowEventType=true/false[Default] : Displays or hides the header event type
	TennisResultsDuration=number : Overrides the number of seconds to show the tennis results slide
	TennisPreviewDuration=number : Overrides the preview's duration (seconds) while showing a tennis event
	TennisPreviewEvents=integer : Overrides the number of preview events shown while showing tennis event details (0 disables previews)
	TennisResultPreviewEvents=integer : Overrides the number of preview events shown while showing a tennis result (0 disables previews)
	TennisAmbienceVolume=number : Sets the ambience audio volume. The value should be from 0.0 (off) to 1.0 (max). The default is 0.15
	TennisCheersVolume=number : Sets the cheering audio volume. The value should be from 0.0 (off) to 1.0 (max). The default is 0.15
	TableTennis_EnableAudio=true[Default]/false : Enables or disables audio specifically for Tennis
	Badminton_EnableAudio=true[Default]/false : Enables or disables audio specifically for Badminton
	Enable_TableTennis=true[Default]/false : Used to disable TableTennis
	Enable_Badminton=true[Default]/false : Used to disable Badminton
	LookupXXX : Turns on lookup filename for tennis type XXX. Names are mapped from player ID

Archery Options:
	ArcheryShowEventType=true/false[Default] : Displays or hides the header event type
	ArcheryResultsDuration=number : Overrides the number of seconds to show the archery results slide
	ArcheryPreviewDuration=number : Overrides the preview's duration (seconds) while showing an archery event
	ArcheryPreviewEvents=integer : Overrides the number of preview events shown while showing archery event details (0 disables previews)
	ArcheryResultPreviewEvents=integer : Overrides the number of preview events shown while showing an archery result (0 disables previews)
	ArcheryCheersVolume=number : Sets the cheering audio volume. The value should be from 0.0 (off) to 1.0 (max). The default is 0.15
	ArcheryImpactVolume=number : Sets the audio volume of the impact of an arrow with the target. The default is 0.5
	Archery_EnableAudio=true[Default]/false : Enables or disables audio specifically for Archery
	Enable_Archery=true[Default]/false : Used to disable Archery
	LookupXXX : Turns on lookup filename for archery type XXX. Names are mapped from player ID

Keno Options:
	KenoSimulateNoBalls=false[Default]/true : Used to test the Failure screen by preventing draw numbers from being received
	KenoCustomPayTable : When specified as an argument, KenoPaytable.cfg will be loaded from the root VisionViewer EXE directory
	KenoDualView : Specifies that the viewer is run as part of a dual-view Keno setup. It will be the primary screen if "KenoResults" is not specified.
	KenoResults : To be used in conjunction with "KenoDualView". Specifies that the viewer is run as the secondary results history screen of a dual-view Keno setup.
	KenoCameraStream : Used to hide the draw device animation during a draw, in order to allow the video stream of physical device to be visible.
	KenoCustomInstructions : Used in Romanian/Spanish versions to replace generic instructions pages with the instructions in the Config/KenoCustomInstructions.cfg
	KenoFlyInFrames=integer : Overrides the number of frames for the ball to fly into the machine. The Default is 20
	KenoFlyOutFrames=integer : Overrides the number of frames for the ball to fly out of the machine. The Default is 10
	KenoBallPauseFrames=integer : Overrides the number of frames to display the ball. The Default is 90.
	Enable_Keno=true[Default]/false : Used to disable keno

	Preamble pages options:
	KenoShowJackpotsPage=true[Default]/true : Used to hide the 1st page (with Jackpots payouts)
	KenoShowInstructions1=true[Default]/true : Used to hide the Instructions page 1 ("20 Balls drawn from 80")
	KenoShowInstructions2=true[Default]/true : Used to hide the Instructions page 2 ("Play the Pick 10 game..")
	KenoShowInstructions2=true[Default]/true : Used to hide the Instructions page 3 ("Pick3 to Pick10 games have multiple pay levels..")
	KenoShowPickPages=true[Default]/true : Used to hide the payouts pages for Pick 10 to 1
	KenoShowRecentWinnersPage=true[Default]/true : Used to hide the Recent Winnings page
	KenoShowInstructions4=true[Default]/true : Used to hide the Instructions page 4 ("Pick 1 to 10 numbers from 80")

SpinAndWin Options:
	SpinAndWinRotations=number : Overrides the number of full rotations for each spin. The default is 5
	SpinAndWinRotationDuration=number : Overrides the number of seconds to rotate the wheel. The default is 20s
	SpinAndWinResultsDuration=number : Overrides the number of seconds to show the results slide
	SpinAndWinHidePayTable : If specified, hides the Pay Table
	SpinAndWinSupportLevels=true[Default]/false : Used to turn off support for displaying bet volume levels on the wheel
	SpinAndWinBackground=1[Default]/2 : Used to specify either the wood or felt background
	Enable_SpinAndWin=true[Default]/false : Used to disable SpinAndWin

BasketballLeague Options:
	BasketballLeagueResultsDuration=number : Overrides the number of seconds to show the basketball league results slide
	Enable_BasketballLeague=true[Default]/false : Used to disable Basketball League
	BasketballLeaguePage1Duration=number : Overrides the default number of seconds to display odds Page 1. The default is 10
	BasketballLeaguePage2Duration=number : Overrides the default number of seconds to display odds Page 2. The default is 10
	BasketballLeagueResultsPage1Duration=number : Overrides the default number of seconds to display odds Results Page 1. The default is 10
	BasketballLeagueResultsPage2Duration=number : Overrides the default number of seconds to display odds Results Page 2. The default is 10

IceHockey Options:
	IceHockeyResultsDuration=number : Overrides the number of seconds to show the ice hockey results slide
	Enable_IceHockey=true[Default]/false : Used to disable ice hockey 

IceHockeyLeague Options:
	IceHockeyLeagueResultsDuration=number : Overrides the number of seconds to show the ice hockey league results slide
	Enable_IceHockeyLeague=true[Default]/false : Used to disable ice hockey league

IceHockeyShootout Options:
	IceHockeyShootoutResultsDuration=number : Overrides the number of seconds to show the ice hockey shootout results slide
	Enable_IceHockeyShootout=true[Default]/false : Used to disable ice hockey shootout

PreRecFootballLeague Options:
	PreRecFootballLeagueResultsDuration=number : Overrides the number of seconds to show the football results slide
	PreRecFootballLeaguePage1Duration=number : Overrides the default number of seconds to display odds Page 1. The default is 10
	PreRecFootballLeaguePage2Duration=number : Overrides the default number of seconds to display odds Page 2. The default is 10
	PreRecFootballLeaguePage3Duration=number : Overrides the default number of seconds to display odds Page 3. The default is 10
	PreRecFootballLeaguePage4Duration=number : Overrides the default number of seconds to display odds Page 4. The default is 10
	PreRecFootballLeaguePage5Duration=number : Overrides the default number of seconds to display odds Page 5. The default is 10
	PreRecFootballVoiceoverVolume=number : Overrides the default voice over volume for all PreRecFootball game types. The default is 1.0
	PreRecFootballEnglishVoiceoverVolume=number : Overrides the voice over volume for the English game
	PreRecFootballLeaguePreviousResultsShowEventNumber=false[Default]/true : Used in the previous results ticker to show the event number instead of the round number.
	PreRecFootballLeagueShowGameTimer=true[Default]/false : Used to disable the in-game football game timer
	ShowBrandLogo : Used to display Soccerbet logo (logo is hidden by default)
	Enable_PreRecFootballEnglishLeague=true[Default]/false : Used to disable pre-recorded football english league
	Enable_PreRecFootballItalianLeague=true[Default]/false : Used to disable pre-recorded football italian league
	GameChangerLeague : this parameter is used to enable the GameChanger product with full UI. Applies to English product only.
	GameChangerNoUILeague : this parameter is used to enable alternative GameChanger set of Team Kits and Header logos. No UI will be alllied. Applies to English product only.

PreRecFootball Options:
	PreRecFootballResultsDuration=number : Overrides the number of seconds to show the football results slide
	PreRecFootballPage1Duration=number : Overrides the default number of seconds to display odds Page 1. The default is 10
	PreRecFootballPage2Duration=number : Overrides the default number of seconds to display odds Page 2. The default is 10
	PreRecFootballPreviewDuration=number : Overrides the preview's duration (seconds) while showing a PreRecFootball event
	PreRecFootballPreviewEvents=integer : Overrides the number of preview events shown while showing PreRecFootball event details (0 disables previews)
	PreRecFootballResultPreviewEvents=integer : Overrides the number of preview events shown while showing PreRecFootball result (0 disables previews)
	PreRecFootballVoiceoverVolume=number : Overrides the default voice over volume for all PreRecFootball game types. The default is 1.0
	PreRecFootballEnglishVoiceoverVolume=number : Overrides the voice over volume for the English game
	PreRecFootballShowGameTimer=true[Default]/false : Used to disable the in-game football game timer
	ShowBrandLogo : Used to display Soccerbet logo (logo is hidden by default)
	Enable_PreRecFootballEnglish=true[Default]/false : Used to disable pre-recorded football english 
	Enable_PreRecFootballItalian=true[Default]/false : Used to disable pre-recorded football italian
	GameChanger : this parameter is used to enable the GameChanger product with full UI. Applies to English product only.
	GameChangerNoUI : this parameter is used to enable alternative GameChanger set of Team Kits and Header logos. No UI will be alllied. Applies to English product only.

VideoFootball Options:
	VideoFootballEffectsVolume=number : Overrides the default effects volume for all VideoFootball game types. The default is 0.3
	VideoFootballEnglishEffectsVolume=number : Overrides the effects volume for the English game. The default is 0.3
	VideoFootballSpanishEffectsVolume=number : Overrides the effects volume for the Spanish game. The default is 0.3
	VideoFootballItalianEffectsVolume=number : Overrides the effects volume for the Italian game. The default is 0.3
	VideoFootballVoiceoverVolume=number : Overrides the default voice over volume for all VideoFootball game types. The default is 1.0
	VideoFootballEnglishVoiceoverVolume=number : Overrides the voice over volume for the English game. The current default is 6.0
	VideoFootballSpanishVoiceoverVolume=number : Overrides the voice over volume for the Spanish game. The default is 1.0
	VideoFootballItalianVoiceoverVolume=number : Overrides the voice over volume for the Italian game. The default is 1.0
	VideoFootballShowGoalTime=false[Default]/true : Used to enable the in-game Goal minute display
	VideoFootballShowGameTimer=true[Default]/false : Used to disable the in-game football game timer
	VideoFootballPage1Duration=number : Overrides the default number of seconds to display odds Page 1. The default is 10
	VideoFootballPage2Duration=number : Overrides the default number of seconds to display odds Page 2. The default is 10
	Enable_VideoFootballEnglish=true[Default]/false : Used to disable video football english
	Enable_VideoFootballItalian=true[Default]/false : Used to disable video football italian
	Enable_VideoFootballSpanish=true[Default]/false : Used to disable video football spanish

VideoFootballLeague Options:
	VideoFootballLeagueEffectsVolume=number : Overrides the default effects volume for all VideoFootballLeague game types. The default is 0.3
	VideoFootballEnglishLeagueEffectsVolume=number : Overrides the effects volume for the English game. The default is 0.3
	VideoFootballSpanishLeagueEffectsVolume=number : Overrides the effects volume for the Spanish game. The default is 0.3
	VideoFootballItalianLeagueEffectsVolume=number : Overrides the effects volume for the Italian game. The default is 0.3
	VideoFootballLeagueVoiceoverVolume=number : Overrides the default voice over volume for all VideoFootballLeague game types. The default is 1.0
	VideoFootballEnglishLeagueVoiceoverVolume=number : Overrides the voice over volume for the English game. The current default is 6.0
	VideoFootballSpanishLeagueVoiceoverVolume=number : Overrides the voice over volume for the Spanish game. The default is 1.0
	VideoFootballItalianLeagueVoiceoverVolume=number : Overrides the voice over volume for the Italian game. The default is 1.0
	VideoFootballLeaguePreviousResultsShowEventNumber=false[Default]/true : Used in the previous results ticker to show the event number instead of the round number.
	VideoFootballLeagueShowGoalTime=false[Default]/true : Used to enable the in-game Goal minute display (for the main game only)
	VideoFootballLeagueShowGameTimer=true[Default]/false : Used to disable the in-game football game timer
	VideoFootballLeaguePage1Duration=number : Overrides the default number of seconds to display odds Page 1. The default is 10
	VideoFootballLeaguePage2Duration=number : Overrides the default number of seconds to display odds Page 2. The default is 10
	VideoFootballLeaguePage3Duration=number : Overrides the default number of seconds to display odds Page 3. The default is 10
	VideoFootballLeaguePage4Duration=number : Overrides the default number of seconds to display odds Page 4. The default is 10
	VideoFootballLeaguePage5Duration=number : Overrides the default number of seconds to display odds Page 5. The default is 10
	Enable_VideoFootballEnglishLeague=true[Default]/false : Used to disable video football english league
	Enable_VideoFootballItalianLeague=true[Default]/false : Used to disable video football italian league
	Enable_VideoFootballSpanishLeague=true[Default]/false : Used to disable video football spanish league

KenoFootball Options:
	KenoFootballEffectsVolume=number : Overrides the default effects volume for all KenoFootball game types. The default is 0.3
	KenoFootballEnglishEffectsVolume=number : Overrides the effects volume for the English game
	KenoFootballVoiceoverVolume=number : Overrides the default voice over volume for all KenoFootball game types. The default is 1.0
	KenoFootballEnglishVoiceoverVolume=number : Overrides the voice over volume for the English game. The current default is 6.0
	KenoFootballShowGoalTime=false[Default]/true : Used to enable the in-game Goal minute display
	KenoFootballShowGameTimer=true[Default]/false : Used to disable the in-game football game timer
	KenoFootballPage1Duration=number : Overrides the default number of seconds to display odds Page 1. The default is 10
	KenoFootballPage2Duration=number : Overrides the default number of seconds to display odds Page 2. The default is 10
	Enable_KenoFootballEnglish=true[Default]/false : Used to disable keno football english
	Enable_KenoFootballItalian=true[Default]/false : Used to disable keno football italian. This event type is only supported in SA Build!
	Enable_KenoFootballSpanish=true[Default]/false : Used to disable keno football spanish. This event type is only supported in SA Build!

KenoFootballLeague Options:
	KenoFootballLeagueEffectsVolume=number : Overrides the default effects volume for all KenoFootballLeague game types. The default is 0.3
	KenoFootballEnglishLeagueEffectsVolume=number : Overrides the effects volume for the English game
	KenoFootballLeagueVoiceoverVolume=number : Overrides the default voice over volume for all KenoFootballLeague game types. The default is 1.0
	KenoFootballEnglishLeagueVoiceoverVolume=number : Overrides the voice over volume for the English game. The current default is 6.0
	KenoFootballLeagueShowGoalTime=false[Default]/true : Used to enable the in-game Goal minute display (for the main game only)
	KenoFootballLeagueShowGameTimer=true[Default]/false : Used to disable the in-game football game timer
	KenoFootballLeaguePage1Duration=number : Overrides the default number of seconds to display odds Page 1. The default is 10
	KenoFootballLeaguePage2Duration=number : Overrides the default number of seconds to display odds Page 2. The default is 10
	KenoFootballLeaguePage3Duration=number : Overrides the default number of seconds to display odds Page 3. The default is 10
	KenoFootballLeaguePage4Duration=number : Overrides the default number of seconds to display odds Page 4. The default is 10
	Enable_KenoFootballEnglishLeague=true[Default]/false : Used to disable keno football english league
	Enable_KenoFootballItalianLeague=true[Default]/false : Used to disable keno football italian league. This event type is only supported in SA Build!
	Enable_KenoFootballSpanishLeague=true[Default]/false : Used to disable keno football spanish league. This event type is only supported in SA Build!

GoalFootball Options:
	EnableMarketsV2 : Will enable the Version 2 Markets. When V2 markets are enabled, additional parameters can be used to disable single elements:
		HasUnderOverSwap=false : Will swap all instances of Under Over
		HasNewMarketRibbon=false : Will remove remove ribbon icon on new markets
		GoalFootballPage3Duration=number : Overrides the default number of seconds to display odds Page 3. The default is 10
		GoalFootballPage4Duration=number : Overrides the default number of seconds to display odds Page 4. The default is 10
		GoalFootballResultPage1Duration=number : Overrides the default number of seconds to display results page 1. The default is 5
		GoalFootballResultPage2Duration=number : Overrides the default number of seconds to display results page 2. The default is 6
	DeactivateAdvancedAnimations : Will revert all UI to previous version. Additional parameters (HasParalaxBackground HasKitBanner HasIntroAnimation HasGoalAnimation) can be used to individually toggle on or off parts of the new UI
	GoalFootballEffectsVolume=number : Overrides the default effects volume for all GoalFootball game types. The default is 0.15
	GoalFootballEnglishEffectsVolume=number : Overrides the effects volume for the English game. The default is 0.15
	GoalFootballVoiceoverVolume=number : Overrides the default voice over volume for all GoalFootball game types. The default is 1.0
	GoalFootballEnglishVoiceoverVolume=number : Overrides the voice over volume for the English game. The current default is 2.0
	GoalFootballShowGoalTime=false[Default]/true : Used to enable the in-game Goal minute display
	GoalFootballShowGameTimer=true[Default]/false : Used to disable the in-game football game timer
	Color parameters for the English version:
		GFEnglishBackgroundColor=Color(R,G,B,Alpha) : Overrides the color of the background (affects the color of the background on the Preview panel)
		GFEnglishHeadingColor=Color(R,G,B,Alpha) : Overrides the color of the headings (Slides and Slide Viewer)
		GFEnglishOddsTextColor=Color(R,G,B,Alpha) : Overrides the color of the odds font
		GFEnglishTeamsPanelLeftSideColor=Color(R,G,B,Alpha) : Overrides the color of the left side of the panel behind the team names
		GFEnglishTeamsPanelCenterColor=Color(R,G,B,Alpha) : Overrides the color of the central part of the panel behind the team names
		GFEnglishTeamsPanelRightSideColor=Color(R,G,B,Alpha) : Overrides the color of the right side of the panel behind the team names
		GFEnglishScoreBackgroundColor=Color(R,G,B,Alpha) : Overrides the color of the score panel on the Results slide
		GFEnglishPreviewHeadingColor=Color(R,G,B,Alpha) : Overrides the color of the headings on the Next Event panel
		GFEnglishRow1ResultsColor=Color(R,G,B,Alpha) : Overrides the color of the 1st row (and all odd rows after that) on the Results slide
		GFEnglishRow2ResultsColor=Color(R,G,B,Alpha) : Overrides the color of the 2nd row (and all odd rows after that) on the Results slide
	Color parameters for other versions: exactly the same as English version above, but replace word "English" with "Italian"/"Spanish"/"Euro".
	GoalFootballPage1Duration=number : Overrides the default number of seconds to display odds Page 1. The default is 10
	GoalFootballPage2Duration=number : Overrides the default number of seconds to display odds Page 2. The default is 10
	Enable_GoalFootballAmerican=true[Default]/false : Used to disable goal football american
	Enable_GoalFootballChampions=true[Default]/false : Used to disable goal football champions
	Enable_GoalFootballChinese=true[Default]/false : Used to disable goal football chinese
	Enable_GoalFootballEnglish=true[Default]/false : Used to disable goal football english
	Enable_GoalFootballEuro=true[Default]/false : Used to disable goal football euro
	Enable_GoalFootballFrench=true[Default]/false : Used to disable goal football french
	Enable_GoalFootballGerman=true[Default]/false : Used to disable goal football german
	Enable_GoalFootballGreek=true[Default]/false : Used to disable goal football greek
	Enable_GoalFootballItalian=true[Default]/false : Used to disable goal football italian
	Enable_GoalFootballSpanish=true[Default]/false : Used to disable goal football spanish
	Enable_GoalFootballTurkish=true[Default]/false : Used to disable goal football turkish
	Enable_GoalFootballWorld=true[Default]/false : Used to disable goal football world

GoalFootballLeague Options:
	EnableMarketsV2 : Will enable the Version 2 Markets. When V2 markets are enabled, additional parameters can be used to disable single elements:
		CoverPageOnce : will remove the cover page from preamble rotation, only playing it once in the beginning
		GoalFootballLeaguePage0Duration=number : Overrides the default number of seconds to display League Standing Screen Page 0. The default is 10
		HasUnderOverSwap=false : Will swap all instances of Under Over
		HasNewMarketRibbon=false : Will remove remove ribbon icon on new markets
		GoalFootballLeaguePage6Duration=number : Overrides the default number of seconds to display odds Page 6. The default is 10
		GoalFootballLeaguePage7Duration=number : Overrides the default number of seconds to display odds Page 7. The default is 10
		GoalFootballLeaguePage8Duration=number : Overrides the default number of seconds to display odds Page 8. The default is 10
		GoalFootballLeaguePage9Duration=number : Overrides the default number of seconds to display odds Page 9. The default is 10
		GoalFootballResultPage1Duration=number : Overrides the default number of seconds to display results page 1. The default is 5
		GoalFootballResultPage2Duration=number : Overrides the default number of seconds to display results pagze 2. The default is 6
	DeactivateAdvancedAnimations : Will revert all UI to previous version. Additional parameters (HasIntroAnimation HasGoalAnimation) can be used to individually toggle on or off parts of the new UI
	GoalFootballLeagueEffectsVolume=number : Overrides the default effects volume for all GoalFootballLeague game types. The default is 0.15
	GoalFootballEnglishLeagueEffectsVolume=number : Overrides the effects volume for the English game. The default is 0.15
	GoalFootballLeagueVoiceoverVolume=number : Overrides the default voice over volume for all GoalFootballLeague game types. The default is 1.0
	GoalFootballEnglishLeagueVoiceoverVolume=number : Overrides the voice over volume for the English game. The current default is 2.0
	GoalFootballLeaguePreviousResultsShowEventNumber=false[Default]/true : Used in the previous results ticker to show the event number instead of the round number.
	GoalFootballLeagueShowGoalTime=false[Default]/true : Used to enable the in-game Goal minute display (for the main game only)
	GoalFootballLeagueShowGameTimer=true[Default]/false : Used to disable the in-game football game timer
	Enable2SecondClip=false[Default]/true : Used to disable the secondary video display in-game
	Show2SecPenaltyDisplay=false[Default]/true : Used to show Penalty's and First To Score on 2 sec clip window
	GoalFootballLeaguePage1Duration=number : Overrides the default number of seconds to display odds Page 1. The default is 10
	GoalFootballLeaguePage2Duration=number : Overrides the default number of seconds to display odds Page 2. The default is 10
	GoalFootballLeaguePage3Duration=number : Overrides the default number of seconds to display odds Page 3. The default is 10
	GoalFootballLeaguePage4Duration=number : Overrides the default number of seconds to display odds Page 4. The default is 10
	GoalFootballLeaguePage5Duration=number : Overrides the default number of seconds to display odds Page 5. The default is 10
	Enable_GoalFootballAmericanLeague=true[Default]/false : Used to disable goal football american league
	Enable_GoalFootballChampionsLeague=true[Default]/false : Used to disable goal football champions league
	Enable_GoalFootballChineseLeague=true[Default]/false : Used to disable goal football chinese league
	Enable_GoalFootballEnglishLeague=true[Default]/false : Used to disable goal football english league
	Enable_GoalFootballEuroLeague=true[Default]/false : Used to disable goal football euro league
	Enable_GoalFootballFrenchLeague=true[Default]/false : Used to disable goal football french league
	Enable_GoalFootballGermanLeague=true[Default]/false : Used to disable goal football german league
	Enable_GoalFootballGreekLeague=true[Default]/false : Used to disable goal football greek league
	Enable_GoalFootballItalianLeague=true[Default]/false : Used to disable goal football italian league
	Enable_GoalFootballSpanishLeague=true[Default]/false : Used to disable goal football spanish league
	Enable_GoalFootballTurkishLeague=true[Default]/false : Used to disable goal football turkish league
	Enable_GoalFootballWorldLeague=true[Default]/false : Used to disable goal football world league

LuckyLoot624 Options:
	LuckyLoot624ResultsDuration=number : Overrides the number of seconds to show the results slide
	LuckyLoot624NumberVolume=number : Overrides the number call volume. The default is 1.0
	LuckyLoot624TutorialPageTime=number : Overrides the number of seconds to display each tutorial. The default is 5
	LuckyLoot624JackpotPageTime=number : Overrides the number of seconds to show each Jackpot. The default is 5
	NumberOfJackpotDisplays [Default]=3 : Sets the number of Jackpot text pages. 3 Max
	JackpotPage1MainText [Default]="1,1 MILLION" : Takes a string that sets the page 1 Jackpot Big value, can be alphabetical or numerical text. JackpotPage1MainText="'1,1 MIllion'"
	JackpotPage1SecondaryText [Default]="100" : Takes a string that sets the page 1 Jackpot small value, can be numerical text. JackpotPage1SecondaryText="'100'"
	JackpotPage2MainText [Default]="110 000" : Takes a string that sets the page 2 Jackpot Big value, can be alphabetical or numerical text. JackpotPage2MainText="'110 000'"
	JackpotPage2SecondaryText [Default]="10" : Takes a string that sets the page 2 Jackpot small value, can be numerical text. JackpotPage2SecondaryText="'10'"
	JackpotPage3MainText [Default]="5 500" : Takes a string that sets the page 3 Jackpot Big value, can be alphabetical or numerical text. JackpotPage3MainText="'5 500'"
	JackpotPage3SecondaryText [Default]="1" : Takes a string that sets the page 3 Jackpot small value, can be numerical text. JackpotPage3SecondaryText="'1'"
	Enable_LuckyLoot624=true[Default]/false : Used to disable LuckyLoot624

LuckyRacing Options:
	LuckyRacingStatsPageDuration=number : Overrides the default number of seconds to display each stats page. The default is 10.0
	LuckyRacingResultsDuration=number : Overrides the number of seconds to show the racing results slide
	Enable_LuckyHorses=true[Default]/false : Used to disable Lucky Horses
	Enable_LuckyCars=true[Default]/false : Used to disable Lucky Cars
	LuckyHorsesRaceFinishers=number : Overrides the default number of finishers to "highlight" on the in-game slide and display on the replay slide. The default is 3. The supported range is 3-6.
	LuckyCarsRaceFinishers=number : Overrides the default number of finishers to "highlight" on the in-game slide and display on the replay slide. The default is 3. The supported range is 3-6.

PreRecBasketball:
	PreRecBasketballDefaultPageDuration=integer  : Overrides the Default number of seconds for displaying each slide on the preamble. (Default is 10 seconds)
	PreRecBasketballPage1Duration=integer : Sets the number of seconds to display the first preamble slide
	PreRecBasketballPage2Duration=integer : Sets the number of seconds to display the second preamble slide
	PreRecBasketballResultsDuration=number : Overrides the number of seconds to show the results slide
	PreRecBasketballVoiceoverVolume=number : Overrides the default Voiceover Volume. (Default is 1.0)
	Enable_PreRecBasketballNBALast60=true[default]/false : Used to disable PreRecBasketball

VirtualBasketball Options:
	VirtualBasketballResultsDuration=number : Overrides the number of seconds to show the virtual basketball results slide
	Enable_VirtualBasketballNBA=true[Default]/false : Used to disable virtual basketball

VirtualBasketballLeague Options:
	VirtualBasketballLeagueEffectsVolume=number : Overrides the default effects volume for all VirtualBasketballLeague game types. The default is 1.0
	VirtualBasketballLeagueVoiceoverVolume=number : Overrides the default voiceover volume for all VirtualBasketballLeague game types. The default is 1.0
	VirtualBasketballLeaguePreviousResultsShowEventNumber=false[Default]/true : Used in the previous results ticker to show the event number instead of the round number.
	VirtualBasketballLeagueShowGameTimer=true[Default]/false : Used to disable the in-game game timer
	VirtualBasketballNBALeagueVoiceoverFrameDelay=number : Used to set frame delay for audio commentary (voiceover)
	VirtualBasketballLeagueResultsDuration=number : Overrides the number of seconds to show the virtual basketball league results slide
	Enable_VirtualBasketballNBALeague=true[Default]/false : Used to disable VirtualBasketballLeague

GoalFootballTournament Options:
	Enable_GoalFootballWorld32Tournament=true[Default]/false : Used to disable GoalFootballWorld32Tournament
	Enable_GoalFootballChampions32Tournament=true[Default]/false : Used to disable GoalFootballChampions32Tournament
	GoalFootballTournamentVoiceoverVolume : Overrides the default voice-over volume for all GoalFootballTournament game types. The default is 1.0
	GoalFootballTournamentEffectsVolume : Overrides the default effects volume for all GoalFootballTournament game types. The default is 1.0
	GoalFootballTournamentPreviousResultsShowEventNumber=false[Default]/true : Used in the previous results ticker to show the event number instead of the round number. 
	GoalFootballTournamentPage0Duration=integer : Sets the number of seconds to display the diagram page that runs before all preamble slide(s)
	GoalFootballTournamentPage1Duration=integer : Sets the number of seconds to display the first preamble slide
	GoalFootballTournamentPage2Duration=integer : Sets the number of seconds to display the second preamble slide
	GoalFootballTournamentPage3Duration=integer : Sets the number of seconds to display the third preamble slide
	GoalFootballTournament_EnableAudio : Enables or disables audio specifically for Tournaments
	GoalFootballTournamentShowGameTimer=true[Default]/false : Used to disable the in-game game timer
	GoalFootballTournamentResultsDuration : Overrides the number of seconds to show the Tournaments results slide
	GoalFootballTournamentFinalResultsDuration : Overrides the number of seconds to show the final Tournament winner slide
	CoverPageOnce : will remove the cover page from preamble rotation, only playing it once in the beginning

SkillRacing Options:
	SkillRacingShowEventType=false/true[Default] : Displays or hides the header event type
	RaceParadeFrames=integer : Overrides the number of frames to hold on each participant. The default is 240 (4 seconds)
	SkillRacingHorseSilkByDraw=true/false[Default] : Specifies whether horse silks are ordered by ID (the default) or by Draw
	SkillRacingRaceFinishers=number : Overrides the default number of finishers to "highlight" on the in-game slide and display on the replay slide. The default is 3. The supported range is 3-4.
	SkillRacingResultsDuration=number : Overrides the number of seconds to show the racing results slide
	Enable_SkillDashingDerby=true[Default]/false : Used to disable SkillDashingDerby

CricketSuperOver Options:
	CricketSuperOverVoiceoverVolume=number : Overrides the default voiceover volume for all CrickerSuperOver game types. The default is 1.0
	CricketSuperOverVoiceoverFrameDelay=number of frames : Sets a delay for audio commentary playback. The default is 0
	CricketSuperOver_EnableAudio=true[Default]/false : Enables or disables audio specifically for CrickerSuperOver
	CricketSuperOverNoBallDisplayFrom=number : Overrides the number of seconds from the beginning of the clip, when NoBall message is displayed. The default is 3.0 seconds
	CricketSuperOverResultsDuration=number : Overrides the number of seconds to show the CrickerSuperOver results slide. The Default is 10.0
	Enable_CricketSuperOverNational=true[Default]/false : Used to disable CricketSuperOverNational
	Enable_CricketSuperOverIndian=true[Default]/false : Used to disable CricketSuperOverIndian
	
CricketFinalOver Options:
	CricketFinalOverVoiceoverVolume=number : Overrides the default voiceover volume for all CrickerFinalOver game types. The default is 1.0
	CricketFinalOverVoiceoverFrameDelay=number of frames : Sets a delay for audio commentary playback. The default is 0
	CricketFinalOver_EnableAudio=true[Default]/false : Enables or disables audio specifically for CrickerFinalOver
	CricketFinalOverNoBallDisplayFrom=number : Overrides the number of seconds from the beginning of the clip, when NoBall message is displayed. The default is 3.0 seconds
	CricketFinalOverResultsDuration=number : Overrides the number of seconds to show the CrickerFinalOver results slide. The Default is 10.0
	Enable_CricketFinalOverNational=true[Default]/false : Used to disable CricketFinalOverNational
	Enable_CricketFinalOverIndian=true[Default]/false : Used to disable CricketFinalOverIndian